Operation Manual

CROSLEY C10
CONTROLS, FEATURES AND CONNECTIONS
1 Stepped Dive Pulley
2 Drive Belt * 2a Belt Hook *
3 Sub-Platter
4 Turntable Platter
5 Tonearm Counterweight * 5a Downforce Scale
6 Tonearm Lift Lever
7 Tonearm Rest
8 Tonearm
9 Lid *
10 Lid Hinges
11 Power Input Jack
12 Phono Out Cables
13 Anti-skating Weight Adjustment
14 Anti-skating Weight *
15 Anti-skating Weight Support Hook
16 Power Switch
17 Headshell with Finger Lift and Fitted Ortofon OM 5E Cartridge
18 Motor
19 45 RPM Adapter
20 Power supply (not shown)
Dear Music Lover,
Thank you for purchasing a Crosley Turntable.
In order to achieve maximum performance and reliability with this record player, you should study these instructions
for use carefully.
During assembly and adjustment of the deck, small parts could be lost if not carefully placed in a suitable area. Before
starting assembly, familiarize yourself with the parts listed above and corresponding numbers in the technical drawings
on the previous page. Separately packed items are marked with an asterisk *.
The Crosley C10 turntable is supplied with a factory fitted and adjusted cartridge.
** The following instructions for adjusting the cartridge are provided in case the cartridge is replaced by a different
model at a later date.
Set-Up
- Make sure the surface you wish to use the turntable on is flat and level before placing the turntable on it.
- Fit the drive belt (2) around the sub-platter (3) and the smaller diameter part of the motor pulley (1). Avoid getting
sweat or grease on the belt as these will deteriorate the performance and reduce the belt’s lifespan. Use absorbent cloth
or towels to remove any oil or grease from the outer edge of the sub-platter (3) and the belt. Fit the platter (4) and felt
mat over the spindle of the sub-platter (3).
- SAVE ALL PACKAGING.