Step 1. Lay table top (part B) upside down on a soft flat surface, such as carpet. Attach one support leg (part A) to another support leg (part A) using bolts (part #1), nuts (part #2) and washers (part #3). NOTE: Please do not fully tighten bolts until unit is fully assembled. #2%0. #2‘0\ #1;, Step 2. Attach remaining support legs (part A) to assembled unit (parts A & B) using nuts (part #2), washers (part #3) and wrench (part #5). Add tube caps (part #4) to support legs (part A).
