PART LIST <> Front Right Leg Front Left Leg Back Right Leg Back Left Leg Top Shelf Frame 1PC 1PC 1PC 1PC 1PC Shelf Frame Bottom Bar Cross Bar Shelf Glass PCS 1PC PCS PCS 1/4" x 1/2"L Sunk Bolt Long Bolt Allen Wrench Safety Strap Kit 40 PCS (Extra 1) 2 PCS (Extra 1) 1PC 1ST
Step 1. Insert top shelf frame (part E} and shelf frames (part F) into front left leg (part B} and back left leg {part D). Insert front right leg (part A) and back right leg (part C) into top shelf frame (part E) and shelf frames (part F) using sunk bolts (part #1) and Allen wrench (part #3). Note: The anti-collapse hole on top shelf frame {part E) should be on the same side as back legs {parts C & D). Please do not fully tighten bolts at this time. Step 2. Carefully tum unit upright.
resembled unit in desired location. Attach bottom bar (part G) between back legs (parts bolts (part #2) and Allen wrench (part #3). Note: Please fully tighten all bolts at this time. using lol Step 3.
D10x 172" Safety Strap Kit Wall Anchor Hook Screw Bolt Safety Wall Strap 18ET 1PC PCS 1PC 1PC 1PC SAFETY WALL STRAP INSTALLATION Important: Safety strap kit (part #4) must be installed to prevent tipping, damage and / or injury. 1) Insert bolt (D) through hook {B) and attach to — prevailed hole in top shelf frame (part E) using a -~ ™~ Philips head screwdriver. / 2) Drill 11/32" hole in the wall where this unit will be secured.
