Specification Sheet

735
Overhead
Cranes / Jibs
HoistsServicesSlingsHardwareLifting
Products
Wire
Rope
CordageContractors
Supply
Fall
Protection
Engineered
Products
J Henry Holland
Phone: [phone]
www.jhenryholland.com
Alabama Sling Center
Phone: [phone]
www.alabamaslingcenter.com
Tennessee Sling Center
Phone: [phone] (Memphis)
Phone: [phone] (Chattanooga)
www.tennesseeslingcenter.com
KCI Crane Service
Phone: [phone]
www.kcicraneservice.com
Load
Securement
>> INTRODUCTION >> MASTER INDEX
>> SECTION GUIDE >> SECTION INDEX
Forged Wire Rope Clips
G-450 Crosby
®
Clips
■
Each base has a Product Identication Code (PIC) for material
traceability, the name CROSBY or CG, and a size forged into it.
■
Based on the catalog breaking strength of wire rope, Crosby wire
rope clips have an efciency rating of 80% for 1/8" - 7/8" sizes,
and 90% for sizes 1" through 3-1/2".
■
Entire Clip-Galvanized to resist corrosive and rusting action.
■
Sizes 1/8" through 2-1/2" and 3" have forged bases.
■
All Clips are individually bagged or tagged with proper application
instructions and warning information.
■
Clip sizes up through 1-1/2" have rolled threads.
■
Meets or exceeds all requirements of ASME B30.26 including
identication, ductility, design factor, proof load and temperature
requirements. Importantly, these wire rope clips meet other
critical performance requirements, including fatigue life, impact
properties and material traceability, not addressed by
ASME B30.26.
■
Look for the Red-U-Bolt
®
, your assurance of Genuine Crosby Clips.
* Electro-plated
U-Bolt and Nuts.
** 2-3/4" and 3-1/2"
base is made of
cast steel.
G-450 Crosby
®
Clips
Rope Size
G-450
Stock
No.
Std.
Package
Qty.
Weight
Per 100
(lbs.)
Dimensions (in.)
in. mm A B C D E F G H
1/8 * 3-4 * 1010015 100 6 .22 .72 .44 .47 .37 .38 .81 .99
3/16 * 5 * 1010033 100 10 .25 .97 .56 .59 .50 .44 .94 1.18
1/4 6-7 1010051 100 19 .31 1.03 .50 .75 .66 .56 1.19 1.43
5/16 8 1010079 100 28 .38 1.38 .75 .88 .73 .69 1.31 1.66
3/8 9-10 1010097 100 48 .44 1.50 .75 1.00 .91 .75 1.63 1.94
7/16 11 1010113 50 78 .50 1.88 1.00 1.19 1.13 .88 1.91 2.28
1/2 12-13 1010131 50 80 .50 1.88 1.00 1.19 1.13 .88 1.91 2.28
9/16 14-15 1010159 50 109 .56 2.25 1.25 1.31 1.34 .94 2.06 2.50
5/8 16 1010177 50 110 .56
2.25 1.25 1.31 1.34 .94 2.06 2.50
3/4 18-20 1010195 25 142 .62 2.75 1.44 1.50 1.39 1.06 2.25 2.84
7/8 22 1010211 25 212 .75 3.12 1.62 1.75 1.58 1.25 2.44 3.16
1 24-26 1010239 10 252 .75 3.50 1.81 1.88 1.77 1.25 2.63 3.47
1-1/8 28-30 1010257 10 283 .75 3.88 2.00 2.00 1.91 1.25 2.81 3.59
1-1/4 32-34 1010275 10 438 .88 4.44 2.22 2.34 2.17 1.44 3.13 4.13
1-3/8 36 1010293 10 442 .88 4.44 2.22 2.34 2.31 1.44 3.13 4.19
1-1/2 38 1010319 10 544 .88 4.94 2.38 2.59 2.44 1.44 3.41 4.44
1-5/8 41-42 1010337 Bulk 704 1.00 5.31 2.62 2.75 2.66 1.63 3.63 4.75
1-3/4 44-46 1010355 Bulk 934 1.13 5.75 2.75 3.06 2.92 1.81 3.81 5.24
2 48-52 1010373 Bulk 1300 1.25 6.44 3.00 3.38 3.03
2.00 4.44 5.88
2-1/4 56-58 1010391 Bulk 1600 1.25 7.13 3.19 3.88 3.19 2.00 4.56 6.38
2-1/2 62-65 1010417 Bulk 1900 1.25 7.69 3.44 4.13 3.69 2.00 4.69 6.63
** 2-3/4 ** 68-72 1010435 Bulk 2300 1.25 8.31 3.56 4.38 4.88 2.00 5.00 6.88
3 75-78 1010453 Bulk 3100 1.50 9.19 3.88 4.75 4.44 2.38 5.31 7.61
** 3-1/2 ** 85-90 1010426 Bulk 4000 1.50 10.75 4.50 5.50 6.00 2.38 6.19 8.38
Crosby Clips, all sizes 1/4" and larger, meet the performance requirements
of Federal Specication FF-C-450 TYPE 1 CLASS 1, except for those provisions
required of the contractor.
SS-450 Stainless Steel Wire Rope Clips
Rope Size
SS-450
Stock
No.
Std.
Package
Qty.
Weight
Per 100
(lbs.)
Dimensions (in.)
(in.) (mm) A B C D E F G H
1/8 3-4 1011250 Bulk 6 .22 .72 .44 .47 .41 .38 .81 .99
3/16 5 1011261 Bulk 10 .25 .97 .56 .59 .50 .44 .94 1.16
1/4 6-7 1011272 Bulk 20 .31 1.03 .50 .75 .66 .56 1.19 1.44
3/8 9-10 1011283 Bulk 47 .44 1.50 .75 1.00 .91 .745 1.63 1.94
1/2 12-13 1011305 Bulk 77 .50 1.88 1.00 1.19 1.13 .88 1.91 2.28
5/8 16 1011327 Bulk 106 .56 2.38 1.25 1.31 1.34 .94 2.06 2.50
SS-450 Stainless Steel Wire Rope Clips
■
Each base has a Product Identication Code (PIC) for
material traceability, the name CROSBY or “CG”, and a size
forged into it.
■
Entire clip is made from 316 Stainless Steel to resist corrosive
and rusting action.
■
All components are Electro-Polished.
■
All Clips are individually bagged or tagged with proper
application instructions and warning information.
SS-450
G-450