Product Manual

1110
Engine Switch
OFF
ENGINE SW.
ON
This switch controls ignion system, fuel system, power
system and solenoid valve.
OFF Stop the engine: Ignion system is in the closed state,
fuel switch is o, solenoid valve switch is o, and power
system switch is o; the engine can’t be started normally.
ON Start/run the engine: Ignion system is in the working
state, fuel switch is on, solenoid valve switch is on, and
power system switch is on. The engine can be started by
the Start Buon, the Recoil Starter or the Bluetooth App.
Start Buon
START
____________
STOP
ON
OFF
When the engine switch is placed in the “ON” posion, use
the Start Buon to start the engine.
Recoil Starter
When baery voltage is too low or at, use the manual recoil
starter to start the engine.
ESC Throle Switch
ESC THROTTLE
STANDARD
TURBO
ECO
1 2 3
① “ECO”
When the ESC switch is turned to “ECO”, the economy
control unit controls the engine speed according to the
connected load. The results are beer fuel consumpon
and less noise.
② “STANDARD”
When the energy saving switch is placed in the
“STANDARD” posion, with load less than 4.5kW, the
engine runs at the rated speed (3,100r/min).
③ “TURBO”
When the energy saving switch is placed on the posion
of “TURBO” the engine runs at the rated speed (3,600r/
min) regardless of whether the load is connected or not.
NOTE: When high current devices are applied, such as air
conditioners, hotplates or water pumps, ESC Throle must
be placed in the “TURBO” posion.