Product Manual

3130
NOTICE: Loose spark plugs may overheat and damage the
engine. Excessive ghtening of spark plugs can damage
the thread on the head of cylinder.
Baery
When the engine is running, the generator’s charging
system will automacally charge the baery. However, if the
generator is not used regularly, it must be charged monthly to
maintain the service life of the baery.
REMOVING THE BATTERY
1. Li handle up, lock handle and x it in place.
2. Loosen the bolts of maintenance cover and remove the
baery maintenance cover CD.
3. Remove the negave (-) cable from the negave (-)
terminal of the baery, and then remove the posive (+)
cable from the posive (+) terminal of the baery.
4. Remove the baery band from the hook at the boom of
generator.
5. Remove the baery from the mounng box.
INSTALLING THE BATTERY
1. Put the baery
in the mounng box.
2. Connect the posive
(+) cable with the
posive (+) terminal
of the baery, ghten
the bolt and cover
the rubber cap.
3. Connect the negave (-) cable with the negave (-)
terminal of the baery, and ghten the installaon bolt.
4. Install the baery band.
5. Reinstall baery maintenance cover and ghten the bolts.
NOTICE: The generator must not run without the baery
maintenance cover ed as this will aect the internal
cooling air ow of the generator and will void the warranty.
CAUTION: Baery Terminals and leads may have a build
up of dirt and corrosion. Wash hands immedialtey aer
handling the baery.
Protecve Fuses
If the fuse blows, the generator will stop.
In the case of a fuse failure, nd out the cause of the failure
and x it before connuing to use. If the fuse connues to fail,
stop using the generator and contact the dealer.
1. Turn the Engine Switch to the “OFF” posion, before
checking and replacing the fuse.
2. Loosen the bolts of baery maintenance cover, remove
the baery maintenance cover CD.
3. Open the cover of the fuse mounng box® (90°
counterclockwise)
4. Replace the fuse with the one of the same type and grade.
Specicaons of fuse: SA, 20A.
5. Cover the fuse mounng box and install the baery
maintenance cover.
NOTICE: Only use the specied, rated and type of fuse as
ed as this may cause damage to the electrical system
and will void the warranty.