Product Manual

1312
Digital Display Meter
(1) Multimeter
(2) QR Code for Bluetooth Connection
(3) LCD screen
(4) Oil warning light
(5) Overload indicator light
(6) AC pilot light
(7) Operating key
(15) Power (16) Speed (17) Frequency (18) Current run time
(19) Cumulative running time
(21) Battery normal
(22) Battery (Voltage greater than 10V)
(23) MAC address
(20) Remaining run lime
(8) Operation identification
(Normal operation)
(9) Bluetooth logo
(10) Fuel level
(11) AC Voltage
(12) AC Voltage
(13) AC Current
(14) AC Current
1. When the Engine Switch is placed in the “OFF” posion
(when the engine is not started):
Operate key 7, only the content of 19 is displayed on the
screen interface (aer each operaon of key 7, the display
will disappear automacally aer 5 seconds).
2. When the engine is not started, but the switch is in the
“ON” posion:
a. No content is displayed on the screen interface.
NOTE: If the baery has been installed, this interface
indicates that the baery voltage is less than 8V
(the baery needs to be charged), one-key start and
Bluetooth APP start cannot be carried out, but the
engine can be started by recoil starter. If there is no
display aer replacing the baery with new one,
please contact your dealer.
b. The screen interface displays the contents of 21-22
and 23 (2 display interfaces in total).
NOTE: The interface with the display contents of 21-
22 indicates that the baery voltage is more than 10V,
one-key start and Bluetooth APP start can be carried
out.
c. The screen interface displays the contents of 24-26
and 23 (2 display interfaces in total).
NOTE: The interface with the display content of 24-26
indicates that the baery voltage is more than 8V but
less than 10V, one-key start and Bluetooth APP start
cannot be carried out, but the engine can be started
by recoil starter.
NOTE: The interface with the display content of 23 can
be used for connecng the MAC address of Bluetooth
device.
The display interface can be switched by operaon of
key 7, and the contents are displayed in turn.
When the above contents are displayed in each
display interface, the contents of 27, 9 (displayed with
Bluetooth, not displayed without Bluetooth) and 10
are also displayed at the same me.
3. When the Engine Switch is placed in the “ON” posion,
and the engine starts successfully and runs normally: the
screen interface displays the contents of 11-14, 15-17, 18,
19, 20, 21-22 and 23 (7 display interfaces in total).