Manual
4. Remove the oil drain plug and allow the oil to drain
completely.
5. Replace and fully ghten the drain plug.
6. Add recommended oil to the upper limit.
7. Reinstall and fully ghten the dipsck.
8. Dispose of used oil at an approved waste management
facility.
AIR FILTER
!
WARNING: DO NOT run the engine without the air
lter, as serious damage can result.
1. AIR FILTER - Loosen the lter x clamp and remove the
cover of the air lter.
2. Remove the foam lter element.
3. Wash in liquid detergent and warm water.
4. Squeeze thoroughly and dry by a clean cloth.
5. Saturate in clean engine oil.
6. Squeeze in a clean, absorbent cloth to remove all
excessive oil.
7. Place the lter in the assembly.
8. Fasten the air lter cover with the x clamp, and then
mount it back to the air lter body.
Pg. 25