Manual

STARTING THE GENERATOR
1. Perform the operang checklist (page 12).
2. Turn the fuel valve to the ‘ON’ posion
3. Put the choke valve switch to ‘CLOSE’ posion
!
NOTE: Choke posion for starng may vary
depending upon temperature and other factors. If re-
starng a warm engine, the choke should be le in the
HALF or OFF posion.
4. ELECTRIC START - Push the rocker ignion switch to
‘I’ run posion. Then push fully and hold switch in ‘II’
posion unl the engine is started. Aer the engine is
started, release the buon (It will return to the ‘I’ run
posion).
5. MANUAL START - Turn the rocker ignion switch to the
‘I’ run posion. Then take hold of the recoil handle and
slow pull unl there is a sense of resistance, and then
quickly pull to start.
!
CAUTION: Ensure that the recoil rope is not
damaged and repair if required.
Pg. 16