Manual

INSTALL THE HANDLE - Place the push handle in the
bracket. Push the pin through the bracket and handle
and x with the clip provided.
❶ Clip
❷ Pin
❸ Push handle
ATTACH NEGATIVE BATTERY WIRE - The sealed baery
on the generator is fully charged and pre-installed
except for the negave (black) baery cable.
1. Cut o e wrap securing loose end of negave
(black) cable.
2. Connect the negave (black) baery cable to
the negave(-) terminal on the baery.
3. Verify if it is correct and secure the connecons
between the baery and generang set.
❶ Posive (+) terminal (red)
❷ Negave ( - ) terminal (black)
Pg. 11
SUPPORT
BRACKET