Product Manual

CONNECTING THE HOSES
!
NOTE: DO NOT Operate this pump unl you have read
ALL safety, operaon, and maintenance Instrucons listed
in this manual.
1. Pump connecons - Check you have been provided with
all the following parts (Parts may vary from dierent
models). Connect them as follows;
1.1 Connect the lter to the sucon hose.
!
CAUTION: Ensure that the lter is securely
connected so it can prevent debris being passed
into the pump. Keep the sucon hose at least
200mm below depth ensuring it is fully submerged
and there are no obstrucons.
1.2 Connect the sucon hose to the inlet port
!
CAUTION: It is recommended that the sucon
hose be made of hardened pipe and it is short in
length (7m maximum based on sucon depth).
1.3 Connect the outlet hose to the outlet port
!
CAUTION: The maximum water ow for the
pump is based on rpm, outlet size and hose size.
It is recommended to use a 3” hose for maximum
water ow. Fasten all hoses to the pump so they
cannot loosen under high pressure.
Suction hose
❶ Inlet port
❷ Rubber sealing gasket
❸ Hose tail
❹ Hose nut
❺ Clamp
❻ Sucon hose
Pg. 9
❶ Outlet port
❷ Rubber sealing gasket
❸ Hose tail
❹ Hose nut
❺ Clamp
❻ Outlet pipe