Product Manual
2.6 - SPARK PLUG - Check the spark plug is clean and
change if required.
I. Clean any dirt from the spark plug cap and spark
plug base.
Ii. Remove the spark plug cap.
Iii. Using socket wrench to loose and remove the spark
plug.
Iv. lnspect the spark plug and spark plug washer, if it’s
damaged or worn, replace with new one. Clean the
spark plug with wire brush before reng.
V. Check spark plug gap. Carefully bend side electrode
to adjust the gap if necessary.
SPARK PLUG GAP: 0.6mm to 0.8mm
SPARK PLUG: LG F7RTC
Vi. Carefully thread the plug into the engine by hand.
Vii. Aer the spark plug seated, use spark plug wrench
to ghten it. Spark Plug ghten Torque: 20-25 N.m
Viii. Aach the spark plug wire to the plug.
Viii. Replacement spark plug: LG F7RTC
!
WARNING: Only use recommended spark plug
or equivalent. DO NOT use spark plugs that have
improper heat range.
Pg. 20