Product Manual
2.4 - AIR FILTER - Check the air lter/s are clean and
change if required.
I. Loosen the nut to remove the lter cover.
Ii. Loosen the wing nut to remove the lter.
Iii. Clean/change the lter/s.
Foam lter: Clean the foam lter using warm
water with detergent. Dry the lter by pressing it
into a clean dry towel. Aer drying, lightly apply
clean engine oil to the lter.
Paper lter: Lightly tap the lter so that the dirt
can fall o. Never brush the dirt, which may
push the dirt into the lter. If the dust does not
remove and the lter is sll dirty, replace it.
Iv. Reassemble the lter back to the units.
V. Fasten cover with the screw down nut.
!
WARNING: DO NOT run the engine without
the air lter, serious damage can result.
Pg. 19