Product Manual

2.2 - ADDING ENGINE OIL - Check oil levels are at the
correct level.
i. Place the engine on a level surface.
ii. Remove the dipsck and wipe it clean.
ii. Reinsert and check the dipsck for oil level.
!
CAUTION: Reinstall dipsck into tube; rest on oil
ll neck, DO NOT thread cap into tube.
iv. Add the recommend oil to the upper limit of the
dipsck.
2.3 - CHANGING OIL - If the oil is dirty, replace with new
oil.
!
CAUTION: Change oil when the engine is warm
from operaon.
i. Place the engine on a level surface.
ii. Prepare a tray to catch the oil.
iii. Remove the oil drain plug and allow the oil to drain
completely.
iv. Replace and fully ghten the drain plug.
v. Add recommended oil to the upper limit.
vi. Reinstall and fully ghten the dipsck.
vii. Dispose of used oil at an approved waste
management facility.
Pg. 18