Product Manual

Pg. 7
OPERATION (Full instrucons pg. 22 to 30)
!




!
NOTE: Turn on the fuel valve.
1. Push the engine switch on the control panel to the
“ON” posion (Refer to page 17).
2. Pull the choke lever out to the “START” posion.
3. Pull the starter grip lightly unl resistance is felt, then
pull briskly out. Repeat unl the engine starts.
4. Push the choke lever back to the “RUN” posion.
5. The green “RUN” light will illuminate when the
generator is ready for use before connecng any
loads.
6. Make sure that all appliances to be connected have
been switched o and are in good working order.
Conrm that the combined electrical rang of the
appliances does not exceed that of the generator.
7. Connect the appliance to the appropriate receptacle
on the generator’s control panel.
8. To minimize fuel consumpon and noise, push the
economy switch to the “ON” posion. This seng
regulates the engine’s speed so that it matches
the needs of the connected loads. Do not use the
economy seng if you are connecng items with
electric motors that have a high amperage draw
during startup, or with appliances that cycle on and
o rapidly.
SHUTDOWN
!



1. Turn o all connected appliances.
2. Push the engine switch on the control panel to the
“OFF” posion.
3. Turn the fuel valve o.