Product Manual
Pg. 33
CHANGING OIL
Drain the oil while the engine is sll warm to assure rapid
and complete draining (Diagram page 36).
!
1. Loosen oil drain access door screw and remove the door
①.
2. Place an oil drain tray (not provided) underneath the
generator below the plasc oil funnel (to capture dirty
oil) ②.
3. Unscrew and remove oil drain bolt ③.
4. Drain the dirty oil into tray ④. Be sure to allow me for
the oil to drain completely.
5. Replace and ghten oil drain bolt
6. Remove dipsck, wipe it with clean rag, and set aside⑤.
7. Fill the generator with the recommended oil ⑥.
8. Reinsert the dipsck into the ller neck, screwing it
down completely.
9. Remove the dipsck again and check the oil level ⑦.
10. If the oil level is at or below the lower level on the
dipsck, add sucient oil to bring the oil up to the upper
level mark. Do not overll.
11. Reinsert dipsck and be sure to screw down unl ght.
12. Reinstall oil ll access door and ghten screw securely.
The recommended oil is SAE 10W-30 or 15W-30 when the
ambient temperature is above 32° F (0° C).
600 ml
!