Product Manual
PRE-OPERATION CHECK
!
WARNING: Be sure to check the generator is on a level
CHECK THE ENGINE OIL LEVEL
!
NOTICE: Do not use non-detergent oil or 2-stroke
engine oil. It will void the warranty and will shorten the
engine's service life.
• Use a high-detergent, premium quality 4-stroke engine oil.
•
to clean manufacturing debris and
contaminaon during break-in.
• Use SAE 10W-30 or 15W-30 viscosity oil.
1. Loosen the oil ll access door screw and remove the
door.
2. Remove the dipsck, wipe it with a clean rag and reinsert
it into the ller neck, screwing it down completely.
3. Remove the dipsck again and check the oil level.
4. If the oil level is at or below the lower level on the
dipsck, rell with the recommended oil up to the top of
the upper level marking. Do not overll.
5. Reinsert the dipsck and be sure to screw it down unl it
is ght.
6. Reinstall the oil ll access door and ghten the screw
securely.
!
!
600ml