Product Manual

4. Restart the engine aer checking.
!
NOTE: The generator output automacally resets
when engine is stopped and then restarted.
!
NOTE: The overload indicator light may be ON for
a few seconds at rst when using electric devices that
require a large starng current, such as air condioner,
air compressor, submersible pump, or high-power DC
equipment. This is not a malfuncon.
OUTPUT INDICATOR (GREEN)
When the engine is started the output
indicator turn ON (Green).
① Output indicator
FUEL TANK CAP VENT KNOB
The fuel tank cap has a vent to balance inner and outer
pressure of fuel tank, and stop fuel ow. Turn vent knob
clockwise from OFF to ON to allow fuel to ow into
carburetor to allow the generator to start.
When generator is OFF or moved,
ensure to turn vent knob counter
clockwise from ON to OFF to avoid
possible fuel overow or vapor.
① Vent knob ② Fuel tank cap
RESET BUTTON
If the generator stops output due to
an overload, disconnect all devices,
reduce total waage to within the
applicaon range, and press the reset
buon ①. The generator will
recover to output.
Pg. 15