Product Manual

LOW OIL ALARM (YELLOW)
If engine oil level falls below the lower
level, the low oil alarm will turn on, and
the engine will stop automacally. Rell
engine oil, otherwise engine will not start.
① Engine Oil Alarm
!
NOTE: If engine won’t
start, turn the main switch
to ON posion, then pull
the recoil starter. If low oil
alarm light ickers for a few
seconds, it means engine oil
is insucient. Add engine oil
and retry.
OVERLOAD ALARM (RED)
Overload Alarm is Blinking - The overload alarm light
(RED) ① will turn ON and blink when the total power of
connected electrical devices is close to
rated power.
Overload Alarm is ON - The overload
alarm light will turn ON when it detects
an overload of power to all connected
devices. The electrical breaker will
acvate and stop the generator in order to protect it and
connected devices. The AC output indicator (Green) will be
o, and the overload alarm light (red) will stay on and the
generator will not stop running.
When overload light is ON proceed
as follows:
1. Disconnect all devices and press
the reset buon ①.
2. Reduce total waage of electric devices below the
output range
3. Check for blockages around cooling air inlet and control
unit. If blocked, clear it.
Pg. 14