Product Manual

SMART-THROTTLE SWITCH (ECO-MODE)
① ON - When smart-throle switch is in
ON posion, the economic control mode
will automacally adjust the engine speed
according to the connected load, so as
to achieve low fuel consumpon and low
noise.
② OFF - When smart-throle switch is in the OFF posion,
the engine will run at rated speed (5000rpm), regardless of
load.
!
NOTE: Smart-throle switch must be in OFF posion,
when applying to electric devices that require a large
starng current, such as air condioner, air compressor,
submersible pump, or high-power DC equipment.
DC PROTECTOR
The DC protector turns o
automacally when DC load
exceeds the rated output of
generator or with a reverse
connecon on +/- .
!
NOTE: If DC protector turns o, reduce the load to
generator (to below the specied rated output). If it turns
o again, consult your local dealer.
!
NOTE: Press to reset DC protector.
① RESET ②
GROUND (EARTH) BOLT/NUT
TERMINAL
Make sure ground (earth) terminal
of generator is connected to avoid
electric shock. When electric
device is applied, generator should
connect with earth ground.
① Ground (earth) terminal
Pg. 13