Outback Product Manual

1. Start the generator.
2. Connect the plug with the AC
socket.
3. Make sure the AC output indicator
is ON (Green).
① AC output indicator
4. Turn the smart–throttle Switch to
the ON position, and then turn on all
electric devices.
AC CONNECTION (POWERING EQUIPMENT)
!
WARNING: Be sure all electric devices are turned o
before connecon.
!
NOTICE
1. Be sure all electric devices including lines and plugs
connecons are in good condion before connecng to
generator.
2. Be sure the total load is within generator rated
output.
3. Be sure the socket load current is within socket
rated current.
!
NOTICE: Do not run generator for extended periods
with no load or minimal load (eg. Powering low wattage
equipment such as TVs and Radios). This may cause
premature spark plug failure, excessive carbon build up
or high oil consumption. To prevent this, run the
generator periodically with an increased load.
STARTING THE ENGINE
Pg. 21