Manual

4
APPLICATIONS
Piers, pre-cast beams, foundations, stairs, walls, floors, slabs, panels, floor stumps,
footings and fence posts.
FUNCTIONS & CONTROLS
The machine is controlled by an ON/OFF switch and a throttle lever.
The motor is 4-stroke and only unleaded petrol can be used.
MECHANICAL HAZARDS
Do not operate the machine unless all protective guards are in place.
Keep hands and feet clear of rotating and moving parts to avoid injury.
Ensure that the motor is in the OFF position and the spark plug lead is disconnected
before removing the guards or making adjustments.
Do not leave the machine in operation while it is unattended.
Exercise care when operating the unit. Exposure to vibration or repetitive work may be
harmful to hands and arms.
Do not hold the vibrator shaft while in operation, hold the unit with both hands on the
handles provided and use the shoulder strap to help support the unit.
Never stand or place your foot on the vibrator head while in operation.
Ensure that any repairs to the motor and machine are carried out by authorised service
agent.
NOISE HAZARDS
Excessive noise can lead to temporary or permanent loss of hearing.
Wear an approved hearing protection device to limit noise exposure, as required by
occupational health and safety regulations.
ADDITIONAL HAZARDS
Slip/Trip/Fall is a major cause of serious injury or death.
Avoid loss of balance by starting the unit on a flat, level surface and only pick up when it
is operating.
Beware of uneven or slippery work surfaces.
Exercise care when working in the vicinity of unprotected holes or excavations.