Product Manual

5
MAINTENANCE
When assembling, lubricating, or adjusting any part of the machine, make sure to stop the
engine and disconnect the spark plug wire. Service the engine according to the engine
manufacturer’s specifications. Refer to the engine operation and maintenance manual.
Maintenance: Every 8 hours or daily
• Check for loose bolts and nuts, retighten if necessary.
• Check and clean the air filter element, re-lube the element according to engine
manufacturer’s recommendations. If operating conditions are usually dusty and
severe, cleaning of filter elements should be done more frequently.
• Check oil level in crankcase and replenish as necessary.
Recommended engine oil is SAE-30.
Maintenance: Every 450 – 500 hours
FUEL & LUBRICANT
Engine
Model
Fuel Tank
Capacity
Engine
Oil Per Litre
Engine
Oil Type
Fuel
Type
Spark
Plug
EY20D
3.8L
0.6L
SAE30
Petrol
NGK BR6HS
DY272D
3.2L
0.9L
SAE30
Diesel
-
DY272DS
3.2L
0.9L
SAE30
Diesel
-
EX17
3.6L
0.6L
SAE30
Petrol
NGK BR6HS
EH25DU
6.0L
1.0L
SAE30
Petrol
NGK BR6HS
TRANSPORTATION
• Before transportation, confirm that the fuel shut-off valve is closed.
• Be sure to let the engine cool off before transportation.
• When loading and unloading the machine to and from the vehicle, lift the machine
with extreme care. The machine is heavy, and must not be lifted single-handedly. Lift
the machine by two people holding each side of roll frame.
• Tie the machine firmly to the vehicle during the transportation.