Operation Manual

3
This manual contains important information on how to use the following power trowel
models CPT24S, CPT34R, CPT34RD, CPT40R, CPT40RD and CPT46S properly and safely.
Please read through this manual before you attempt to operate this product.
SAFETY PRECAUTIONS
Before operating this piece of equipment, the operator should read this manual.
Whenever possible, he/she should be shown how to operate the unit by an experienced
operator. It is dangerous for an inexperienced person to operate any machine. Trial and
error is not the safe way to become familiar with a piece of equipment.
To prevent injury wear the following protective clothing: Gloves, hard hat, work boots, ear
plugs, safety goggles and any other protective devices required by job conditions.
• Stay AWAY from blades during operation.
• Be cautious with the ventilation of work place. Avoid operating machine in closed
area, since engine exhaust contains poisonous gases.
• Be careful with hot components. Mufflers and other parts of the engine are hot during
operation and right after shutdown.
• Fasten fuel cap tightly and close fuel strainer cock during transportation.
REFITTING HANDLE ASSEMBLY AND CABLE
For Packaging and Transport
reasons you have received your
CROMMELINS™ Power Trowel
with the Handle Assembly and
Cable removed from the
machine and packaged on top.
IMPORTANT: This machine has
been factory set and run. DO
NOT adjust any screws or cables
during the handle assembly
process.
To refit the Handle Assembly please carry out the following procedure;