Operation Guide

ENGINE OPERATION
L-N Operation Manual
45
Figure 17
2. If your engine speed control is similar to
Figure 18 press the STOP button
(Figure 18, (1)) and the engine speed control
lever (Figure 18, (2)) will automatically return
to the STOP position.
Note: The speed control lever is spring-
loaded so when you push down on the
STOP button, the speed control lever
moves back to the shut-off position.
There is no idle position or
intermediate speeds.
Figure 18
3. If your engine speed control is similar to
Figure 19:
(a) Turn the engine speed control knob
(Figure 19, (1)) to the left (Figure 19, (2)).
(b) Slide the engine speed control knob to the
STOP position (Figure 19, (3)).
(c) Turn the engine speed control knob to the
right (Figure 19, (4)) to tighten it.
Figure 19
Electric Start Models
Turn the key to the OFF position (Figure 20, (1))
and remove it from the key switch.
Figure 20
STOP
SLOW
RUN
(1)
(2)
0001361A
RUN
STOP
(
1
)
(
2
)
0001362A
(
1
)
(
4
)
(
3
)
(
2
)
0001363A
OFF
ON
STA RT
(1)
0001549D
LN Series OperationManual_A4.book 45 ページ ２００６年５月１２日 金曜日 午前１０時１８分