0” CROMMELINS™ FLOOR GRINDER OPERATION & INSTRUCTION MANUAL Thank you for your selection of an 10” CROMMELINS™ Floor Grinder. This Operation Manual explains its use, installation, checking and maintenance. We highly recommend that you retain this manual for ready reference regarding proper handling of the 10” CROMMELINS™ Floor Grinder. Spare Parts & Service Phone: 1300 554 524 Freecall Fax: 1800 636 281 spareparts@crommelins.com.au www.crommelins.com.
Thank you very much for purchasing a 10” CROMMELINS™ FLOOR GRINDER. This manual covers operation and maintenance of the 10” CROMMELINS™ FLOOR GRINDER. Please take a moment to familiarise yourself with the proper operation and maintenance procedures in order to maximise the safe and efficient use of this product. Keep this owner’s manual at hand, so that you can refer to it at anytime. Due to constant efforts to improve our products, certain procedures and specifications are subject to change without notice.
GENERAL SAFETY RULES This manual contains important information on how to use the following floor grinder model CFGKUB correctly and safely. Please read through this manual before you attempt to operate the machine. This floor grinder is designed to give safe and dependable service if operated according to the instructions. 1. 2. 3. 4. 5. 6. 7. 8.
GENERAL INFORMATION The floor grinder is a sturdy, reliable and easy to use machine. The floor grinder is fitted with 2.2kW single phase motor. This motor offers direct drive to the grinding plate with the incorporation of a flexible coupling between the motor and the plate. The shroud system is unique in design, automatically adjusting to suit segment height and floor angle. This shroud system when used in conjunction with an appropriate industrial vacuum unit eliminates dust loss during grinding.
OPERATING FLOOR GRINDER The floor grinder is designed to be used either for wet or dry floor grinding. If the floor that has to be ground is dry ensure a suitable industrial vacuum is connected and also ensure the operator is wearing suitable breathing respiratory equipment. Contact your local work place health authority to ensure that their requirements regarding respiratory equipment are being met. STARTING THE GRINDER 1.
MAINTENANCE Daily cleaning: The motor in use should always be kept clean. No water droplets, cotton etc should be allowed to get into the interior of the motors. Check on load current: While the motor is in operation, constant care should be taken to keep the load current below the rated value. Running sound: During the operation of the motor there must be no rubbing noise shrike or other random noise. Stop the motor immediately and restart after the corrections have been made.
PARTS DIAGRAM 7
PARTS LIST 8
WARRANTY Consult the CROMMELINS Machinery warranty leaflet (supplied with your new product) for full details and a list of service dealers for this product, also available online at www.crommelins.com.au. NOTES ................................................................................................................................................. ................................................................................................................................................. ........
NOTES ................................................................................................................................................. ................................................................................................................................................. ................................................................................................................................................. ....................................................................
NOTES ................................................................................................................................................. ................................................................................................................................................. ................................................................................................................................................. ....................................................................
Crommelins Operations Pty Ltd t/as Crommelins Australia and Crommelins Machinery ABN 11 008 889 656 PO Box 352 BENTLEY WA 6982 Ph: (08) 9350 5588 Fax: (08) 9451 6381 email@crommelins.com.au www.crommelins.com.
