Instruction manual

o
1
Winding the bobbin
Bobbin-winding
thread guide
1. To prevent the needle from moving
during winding, pull the balance wheel (28)
to the side, as shown.
Take the spool and put it onto the spool holder
(31) - as shown above - after having pulled out
the spool holder.
2. Draw the thread from the spool holder
through the bobbin-winding thread guide (21)
as shown.
3. Draw the end of the thread through the hole
of the bobbin, as shown, and manually wind a
few coils onto the bobbin.
Spool holder
Bobbin / bobbin spindle
1
2
3
14