Use and Care Manual

Assemble rear wheels
7. T
o assemble rear wheels: Attach the gear, wheel, washer and insert the clip pin through the
axle, then cover with the wheel cap as picture 4-1.
8. Insert the legs of the stroller as picture 4-2.
Unfold and fold canopy
1. Take out the stroller and
all components from the carton.
2. Release the folding hook, unfold the stroller in two opposite directions, as shown in picture 1-1,
until you hear a "click".
3. Push the handle bar up as picture 1-2.
4. Fasten the safety lock as picture 1-3.
5. Connect the hook and loop fasteners on the bottom as picture 1-4.
6. Unfold the canopy.
9. Unzip the window and fold the canopy as picture 5-1.
10. Close the canopy as in picture 5-2.
5. Assemble front wheels: Insert each wheel onto the respective leg and push upward until you
hear a"click".
6. Disassemble front wheels: Press the plastic button on the leg as picture shown by one hand and
pull off the wheels by the other hand.
Assemble front wheels
Assembly: