Specifications

0X6-OJX
UK
Phone: [phone]
1
Phone: 1-800-NELLCOR (USA) Fax: l-888-222-9799
UK Nellcor
10 Talisman Business Center
London Road
Bicester
Oxfordshire
MacDonnell Blvd
PO Box 5840
St. Louis, MO 63
134
_,
Procedures
1. Select a sensor that is appropriate for the patient and the
clinical situation.
Warning: Do not use a damaged sensor or one with
exposed electrical contacts.
Note: Use only NELLCOR sensors, which are available
from:
USA
Mallinckrodt, Inc.
675
,
.
A patient’s vital signs may vary dramatically during the use of
cardiovascular agents
such as those that raise or lower blood
pressure
or those that increase or decrease heart rate.
l The PRO Monitor is compatible only with NELLCOR sensors.
l Software development, software validation, and Risk and
Hazard Analysis has been performed to a registered quality
system.
.
>T
General Notes
SpOZ function. To prevent
such interference, cover the sensor with opaque material.
_,
lights, direct sunlight, operating room lights) may interfere
with the performance of the
.
Bright light sources (e.g., infrared heat lamps, bilirubin
I
patients with compromised circulation (e.g., because of
peripheral vascular disease or vasoconstricting
medications).
l Do not perform any testing or maintenance on a sensor
while it is being used to monitor a patient.