Specifications

Using the Menu System

Set BP. Selection of this button displays the message: Restore BP

mode on power-up? Selection of Yes restores the BP mode to

previous user-selected mode after power-off and returns the Monitor

to the More... menu. Selection of No restores the BP mode to the

default setting of Manual after power-off and returns the Monitor to

the More... menu. Selection of Cancel returns the Monitor to the

More... menu.

Note: The Monitor must be turned off and then on again to activate

this feature.

Alarms. Selection of this button displays the message: Enter alarm

configuration mode? Selection of No returns the Monitor to the

More... menu. Selection of Yes brings up the Alarms menu. Selection

of Reset changes all alarm limits back to the factory defaults and

returns the Monitor to the More... menu. Selection of Save

permanently saves the user-selected alarm limits and returns the

Monitor to the More... menu. Selection of Cancel returns the Monitor

to the More... menu.

Note: The Monitor must be turned off and then on again to activate

this feature.

Reset

SYS DIA MAP BPM SpO

Save

Cancel

180 130 140 160

OFF

30 15 50 40 90

Main. Selection of this button returns the user to the Main menu.

Silence. Selection of this button will cause all alarms except the

FAILSAFE alarm to be muted. A confirmation menu will appear in

Area 2 of the LED. Selection of either Yes or No returns the user to

the Clinician mode menu. If silence is confirmed, the Alarm Silence

button (11) illuminates and alarms are permanently muted. If silence

is not confirmed, the alarm will be audible.

Caution: Alarms will be muted until either the Monitor is switched

off and on again or the Alarm Silence button (11) is pressed.

COMPACT MAN-REV B 1/12/99, 9:47 AM59