Specifications
51
Notes
• Mode 3 suppresses the SpO
2
-derived heart rate, but
allows a heart rate to be displayed from BP (if one is
available and valid).
• When changing from Mode 1 or 2 to Mode 3, the heart
rate will be removed from the LEDs, and “ - ” will be
displayed.
• Changing from Mode 3 to Mode 1 or 2 will remove BP
or “ - ” from the LEDs and display the SpO
2
heart rate.
• In Mode 3, BP heart rate is used by Trends, Printer, and
Host Comm. In Mode 1 and 2, SpO
2
heart rate has
priority. If no SpO
2
heart rate is available, BP heart rate
is used.
• In Mode 3, the heart rate LED and audible beeps are
suppressed as an indication of noncontinuous heart
rate monitoring. In Modes 1 and 2, these beeps and
flashes occur for each pulse detected.
Volume
The pulse tone volume can be set in the range of Off to 9.
The value Off should be selected if no pulse tone is desired.
The volume setting is stored when the Monitor is turned off
and is restored to the user’s preference each time the
Monitor is switched on.
Main
Selection of this button returns the user to the Main menu.
Config Button
Selection of this button displays the Config mode menu,
which allows the Power Save mode and time to be adjusted.
Main
Rotor
Time
Pwr Sav
Using the Menu System
COMPACT MAN-REV B 1/12/99, 9:47 AM51