Specifications

39
• Circulation distal to the sensor site should be checked
routinely. The site must be inspected every 8 hours to ensure
adhesion, skin integrity, and correct optical alignment. If skin
integrity changes, move the sensor to another site.
• Try to keep the patient still, or change the sensor site to one
with less motion.
• Observe all instructions, warnings, and cautions in this manual
and in the directions for use of the sensor.
PROBLEM: A valid SpO
2
signal was present but has disappeared.
CAUSE:
• A BP determination on the same limb is in progress.
SOLUTION:
• An alarm message (No signal) will appear on the screen, and
the audible alarm will sound immediately.
Using the Monitor
COMPACT MAN-REV B 1/12/99, 9:47 AM39