Service manual

2048723-002D CARESCAPE V100 Vital Signs Monitor 2-5
Equipment overview: Right-side panel
21. Pulse Rate window: shows pulse rate in beats per minute.
22. SpO
2
pulse indicator: flashing red LED bar indicates that pulses are being
derived from SpO
2
signals.
23. SpO
2
window: indicates oxygen saturation in %.
24. MAP/Cuff window: indicates measured mean arterial pressure (MAP) in
mmHg and shows cuff pressure during NIBP determination.
25. ADULT indicator: lights to indicate you are making a change to adult/ped
NIBP limits or inflation pressure settings.
26. NEONATE indicator: lights to indicate you are making a change to neonate
NIBP limits or inflation pressure settings.
27. AUTO CYCLE indicator: lights green to indicate auto mode is the chosen
NIBP mode; flashes to indicate you are making a change to the auto mode.
28. Min window: displays the NIBP mode if manual or Stat as well as the cycle
time when taking auto NIBP determinations.
29. HISTORY indicator: flashes to indicate you are in history mode.
30. BATTERY OK indicator: lights green to indicate the monitor is operating on
battery power and that the battery is sufficiently charged.
31. BATTERY LOW indicator: lights amber to indicate low charge for the battery
(less than 45 minutes when solid; 5 minutes or less when flashing).
32. CHARGING indicator: lights green to indicate presence of external power
source and battery charging.
33. Temperature window: indicates measured temperature.
Right-side panel
1