Service manual

continuouslv
Blank
Alarm flashes-others
unchanged
Has no effect
Internal malfunction Refer to Troubleshooting, following
- others
Stops audio/visual
At one pressure level for more Check for kinked hoses; refer to
Flashes 833 until next
determination
Blank Alarm flashes-others
unchanged
Stops audio/visual
indicators
inflation time has exceeded
30 seconds or air leak is
detected
Check for leaks in cuff and hose
connections. Refer to
Troubleshooting, following
Flashes 900 to 999
set
-----
Has no effect
More than 3 min in
If you desire to remain in Calibration
Calibration Mode
Mode, turn power Off/On while
pressing
SET for 20 seconds
Flashes 855 until next Blank
Alarm flashes
--..-
888 for 1
- ---
----
set
_-^--
Flashes 888 for 1
CX’X’&yO”
Flashes 899
Blank
ALARM flashes, others
unchanged
Stops audio/visual
indicators
Monitor unable to make
determination due to
insufficient signal
Refer to Troubleshooting, following
TABLE 5-3.
SYSTEM ALARMS SUMMARY TABLE
PULSE
ALL OTHER
DISPLAY
DISPLAYS
LED
CANCEL
PROBABLE
INDICATORS
SWITCH
CAUSE