Service manual

Revision D DINAMAP
®
ProCare Monitor 6-21
2009381-001
Parts List, Drawings, and Replacement: Assembly/Disassembly of FRUs
Display Board
1. Carefully lift the Main board away from the Display board.
2. Collect the 5 spacers used to align the Main and Display Boards.
3. Lift the display board away from the front panel.
4. The monitor is now completely disassembled.
5. Reverse the above sequence to reassemble the monitor.
6. Be careful not to pinch any cables or tubing during reassembly.
NOTE: Updated Instructions may be included in your replacement parts kit,
always review all material included in your kit.