Service manual

Revision D DINAMAP
®
ProCare Monitor 1-9
2009381-001
Introduction: Intended Audience
Intended Audience
This manual is intended for service representatives and technical personnel who
maintain, troubleshoot, or repair this equipment.
Intended Use
General Use
 The ProCare Monitor is intended to monitor one patient at a time in a clinical
setting.
 Federal law (U.S.A.) restricts this device to sale by or on the order of a
physician.
 To ensure patient safety, use only parts and accessories manufactured or
recommended by GE Medical Systems Information Technologies. Parts and
accessories used shall meet the requirements of IEC 60601-1-1.
 Disposable devices are intended for single use only. They should not be
reused.
 Periodically, and whenever the integrity of the monitor is in doubt, test all
functions.
Related Manuals
Service Policy
The warranty for this product is enclosed with the product in the shipper carton.
All repairs on products under warranty must be performed or approved by
Product Service personnel. Unauthorized repairs will void the warranty. Only
qualified electronics service personnel should repair products not covered by
warranty.
Service Contracts
Extended warranties can be purchased on most products. Contact your Sales
Representative for details and pricing.
Assistance
If the product fails to function properly, or if assistance, service or spare parts
are required, contact Customer Support. Before contacting Customer Support, it
is helpful to attempt to duplicate the problem and to check all accessories to
Manual Title
2009360-001 DINAMAP ProCare Operation Manual