Specifications

7.3 SYSTEM PROGRAMMING - OUTPUT CODES

CODE DESCRIPTION

2331

NORMAL RELAY ACTIVATE (GAS ALARM) (ALL , SENS , NONE )

2112

SETTING GAS ALARM CHANNELS FOR RELAY MONITORING ( 2331 set to SENS )

2323

SETTING RELAY GAS ALARM ACTIVATION LEVEL ( LOW , MID , HIGH )

2321

SETTING RELAY COIL STATE FAIL SAFE ( DE-ENERGIZE ON POWER LOSS )

2313

SETTING RELAY COIL LATCHING STATE ( PUSH BUTTON RELEASE )

2311

SETTING RELAY “ON” TIME DELAY VALUE

2312

SETTING RELAY “OFF” TIME DELAY VALUE

3221

RELAY CHANNEL ENABLE

3132

RELAY TOGGLE ( RELAY TEST FUNCTION )

2332 FAULT RELAY ACTIVATE (ALL , SENS , NONE )

2113 SETTING FAULT ALARM CHANNELS FOR RELAY MONITORING (2332 set to SENS )

3222 EXTERNAL RELAY MODULE CODE ID ASSIGNMENT ( ACTIVATE RRM )

2333 STROBE OUTPUT ACTIVATION LEVEL ( LOW , MID , HIGH )

2123 STROBE OUTPUT AT FAULT ALARM ( YES , NO )

3131 BUZZER AUDIBLE ACTIVATION LEVEL ( LOW , MID , HIGH )

2122 BUZZER AUDIBLE ALARM AT FAULT CONDITION ( YES , NO )

3133 AUXILIARY OUTPUT ACTIVATION LEVEL ( LOW , MID , HIGH )

2121 AUXILIARY OUTPUT AT FAULT ALARM ( YES , NO )

3313 AUXILIARY OUTPUT FOR SYSTEM ALARM ( YES , NO )

3232 REMOTE ANALOG OUTPUT ADDRESS INITIALIZATION ( ACTIVATE RAO )

3231 CHANNEL ENABLE 4 - 20 MA ANALOG OUTPUT MODULE

3112 MONITORING CHANNEL(S) FOR 4 - 20 MA OUTPUT MODULE

1321 SETTING LOW (NULL VALUE) FOR 4 - 20 mA OUTPUT MODULE

1322 SETTING HIGH (SPAN VALUE) 4 - 20 mA OUTPUT MODULE

1331 CALIBRATING LOW (NULL) OF 4 - 20 mA OUTPUT MODULE

1332 CALIBRATING HIGH (SPAN) OF 4 - 20 mA OUTPUT MODULE

3332 VOLTMETER ON ANALOG CHANNELS ( 1.0 4 MA - 5.0 20 MA )

3123 INITIALIZE SYSTEM DEFAULTS

1113 FACTORY DEFAULTS

3311 ENABLE / DISABLE REMOTE DISPLAY MODULE

3223 UART ENABLE

3113 UART CATCHER OR PROTONODE (BACNET)

3331 WDT (WATCH DOG TIMER) TEST