User Manual

Rev. B | 2022.09 cGas Ammonia Vent Line Transmitter - Addendum
© 2022 All rights reserved. Data subject to change without notice. 9
2.4 Exterior Enclosure - Back
The sensor is potted into a 5 cm / 2 in long pipe tting that protrudes from the back of the
enclosure.







NUMBER FEATURE

5 cm / 2in pipe with potted sensor, screws into the cast steel mounting
plate

Cast steel sensor mounting plate

19 mm / 3/4 in cast steel coupler for connecting to mounting pipe

13 mm / 1/2 in water tight cable restraint. If using conduit, replace with
liquid tight type conduit tting.
2.5 Interior Enclosure
The sensor is potted behind the enclosure and wires pass from the back of the enclosure
into the interior of the enclosure and connect to a smart board that is plugged into the main
board.