Technical Specifications

Location Requirements
Do not recess or build-in. This appliance
is designed to be free standing only. To
ensure proper ventilation, allow 5 inches
clearance space between the back and
sides of the refrigerator. If you are installing
the refrigerator next to a xed wall, leave
(100mm) on the hinge side to allow the
door to swing open freely.
NOTE: Avoid installing on weak surfaces unable
to support the weight of the refrigerator when
fully loaded. The refrigerator is intended to be
used in a location where the temperature ranges
from a minimum of 50°F to a maximum of 85°F;
to not hinder the performance of this appliance.
Do not install in direct sunlight or near sources of
heat (stove, heater, radiator, etc.). Do not install in
moist areas or a garage. This unit is not designed
for any type of outside installation. This unit is not
designed to be installed in moving vehicles such
as RVs or to be used with an inverter. This unit is
intended for household use only.
TOP-MOUNTED FRIDGE/FREEZER
CTMR99M1W
CTMR180M1W
5 in
11.8 in
5 in
Dimensions and Installation
Requirements