Technical Specifications

Electrical Requirements
Before connecting the refrigerator to the power source, let it stand upright for approximately
4 hours to avoid any malfunction in the cooling system due to improper handling. Once
ready to connect to the power source, a 115 Volt, 60 Hz, AC only 15 or 20 A fused,
grounded electrical supply is required. It is recommended that a separate outlet serving only
your refrigerator be used. Do not under any circumstances cut or remove the third (ground)
prong from the power cord. Use an outlet that cannot be turned off by a switch. Do not use
an extension cord.
NOTE: Before performing any type of installation, cleaning, or removing a light bulb, turn the
temperature control to OFF and then disconnect the refrigerator from the electrical source. When you are
nished, reconnect the refrigerator to the electrical outlet and reset the control to the desired setting.
TOP-MOUNTED FRIDGE/FREEZER
CTMR99M1W
CTMR180M1W
MODEL #/ SIZE
F
DEPTH - DOORS OPEN 90° (in)
G
DEPTH - CABINET ONLY (in)
H
WIDTH - CABINET (in)
I
WIDTH - DOORS OPEN 90° (in)
CTMR99M1W
9.9 CU. FT.
47.8 22.83 24.02 24.52
CTMR180M1W
18 CU. FT.
58.46 27.76 29.52 30.02
Dimensions and Installation
Requirements
H
I
G
F