Use And Care Manual

3.2 Functions
1) Key
A. Temperature setting button
2) Display screen
①temperature setting1
②temperature setting2
③temperature setting3
④temperature setting4
⑤temperature setting5
⑥Standby indicator
3) Display
When power-on the refrigerator for 1st time, the display screen (including the key light) will shine
in full for 3s, then the refrigerator operates according to temperature setting 3.
Normal operation display
In case of a failure, the appropriate LED lights show in combination the failure code (in recycling
display), In case of no failures, it shows the actual temperature setting.
4) Temperature setting
Each time the temperature setting key A is pressed once, the setting will be changed one time.
After the temperature setting has been completed, the refrigerator will operate according to the
set value after 5s.
From left to right, the set temperature is lower and lower.
The shift regulation is:
5) Standby mode
When the refrigerator is running, long press the temperature setting button last for 3 seconds,
the refrigerator enters into standby mode, and the standby indicator shines, the refrigerator
stops running; when the refrigerator is in standby mode, short press the temperature setting
button, the refrigerator re-starts normal running, and standby indicator goes out.
6) Fault indication
The following warnings appearing on the display indicate corresponding faults of the
refrigerator. Though the refrigerator may still have refrigerator and freezing function with the
following faults, the user shall contact a maintenance specialist for maintenance, so as to
ensure normal use of the refrigerator.
Setting1 Setting2 Setting3 Setting4
Setting5
① ② ③ ④ ⑤ ⑥A
Freezer defrost sensor
The LED1 and LED3 lit
The LED1 and LED4 lit
Refrigerator temperature
sensor circuit
Ambient temperature sensor
The LED1 and LED2 lit
Fault Description
Fault Code
12