Use And Care Manual

7. Remove the hole cap from the top left of the refrigerator door and install it on the
other side.
8. Remove the door stopper from the bottom right side of the freezer and refrigerator
door and install them on the other side.
9.Remove the two hole caps from the left side of middle beam, and install them on the
other side.
10.Put down the refrigerator door on the bottom hinge vertically, then install the middle
hinge on left side of middle beam.
11.Take out the top hinge and top hinge cover from the accessory bag in the refrigerator.
Put down the freezer door on middle hinge vertically, then install the top hinge and
hinge cover, finally to install the cover plate you previously removed.
For the assembly of handle, please refer to chapter 2.2.
（The picture above is only for reference. The actual configuration will depend on
the physical product or statement by the distributor）
The hole cap
Middle hinge
Door stopper
Door stopper
Top hinge
Hinge cover
9