Use And Care Manual
6
Locks
If your Freezer is fitted with a lock, to prevent children being entrapped keep the key out
of reach and not in the vicinity of the appliance. If disposing of an old Freezer break off any
old locks or latches as a safeguard.
Freon-Free
The freon-free refrigerant (R600a) and the foaming insulation material (cyclopentane) that is
environmentally friendly are used for the refrigerator, causing no damage to the ozone layer
and having a very small impact on the global warming. R600a is flammable, and sealed in a
refrigeration system, without leakage during normal use. But, in case of refrigerant leakage
due to the refrigerant circuit being damaged, be sure to keep the appliance away from open
flames and open the windows for ventilation as quickly as possible.flames and open the windows for ventilation as quickly as possible.
Electrical Connection
WARNING!
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord
is damaged, have it replaced by an authorized service center.
This refrigerator should be properly grounded for your safety. The power cord of this
refrigerator is equipped with a three-prong plug which mates with standard three prong
wall outlets to minimize the possibility of electrical shock.
Do not, under any circumstances, cut or remove the third ground prong from the power
cord supplied.cord supplied.
This refrigerator requires a standard 115V A.C. ~/60Hz electrical outlet with three-prong
ground.
This refrigerator is not designed to be used with an inverter.
The cord should be secured behind the refrigerator and not left exposed or dangling to
prevent accidental injury.
Never unplug the refrigerator by pulling the power cord. Always grip the plug firmly and
pull straight out from the receptacle.pull straight out from the receptacle.
Do not use an extension cord with this appliance. If the power cord is too short, have
a qualified electrician or service technician install an outlet near the appliance. Use of an
extension cord can negatively affect the performance of the unit.