Use And Care Manual

26
Replacing LED Refrigerator Lights
Warning
The LED light must be replaced by a competent person. If the LED light is damaged,
follow the steps below:
Inside LED Refrigerator Light
1.
Unplug the refrigerator from the electrical
outlet.
2. 2.
Insert a tool (tweezers or a screwdriver) along
the side opening of the LED light.
3.
Remove LED light A from these Brackets B
and insert a new LED light.
4.
Unplug the wire harness C from the LED
light A and replace the new LED light.
5.
Replace the light cover.
Step 2
B3
B2
A
B1
Step 3
A
C
Step 4
Under Refrigerator Door LED Light
1.
Unplug the refrigerator from the electrical
outlet.
2.
Insert a tool (tweezers or a screwdriver) into
opening A of the LED light. Then unplug the
wire harness B from C.
3. 3.
Remove LED light E from F and insert a new
LED light.
4.
Replace the light cover.
A
Step 2
B
C
E
F
Step 3