System information
6) Press and release the
":"
button. Each press
of
the button changes to
the next melody, note that the LCD screen displays
"S"
and a numeral, which
is the melody number. When the desired musical tone has been the last one
played
press and release the
"P"
button.
7)
The controller will play another musical melody; this is the Stop Melody which
plays when remote start engine run period ends. There are five different melody
choices which can be made.
Press and release
the":"
button. Each
press
of
the button changes to the next melody, note that the LCD screen dis-
plays a numeral, which is the melody number. When the desired musical tone
has been the last one played, you may
1
__
••
_
~
....
.....
.-11
__
••
-.-I=_&.
....
L_-I
.c._
.....
'"
.-1
.&!!!I!!!.a.
_L!!!_~
_
It::ClVt:: Lilt::
,",UlIlI
UIlt::1
UIlUI::tlur
ut:u
Iur
I.e::
::tt:\;UIIU::t,
urnll
Il
crllrp:s
once
OR
press and release the "P" button to scroll back through the features.
• While the controller programming must be "scrolled" through, programming
mode can be exited at any point within the menu by simply not pressing any
buttons for 12 seconds. The Echo chirps once when it exits programming mode.
•
If
the Echo is configured for "MUTE" operation (vibrates instead chirping),
then in programming it will not play the musical melodies. Instead, it vibrates
when the remote start Melody and Stop Melody are accessed for programming.
Timer Functions: The ECHO 2-way controller has 2 timer functions. A parking
timer for timing how long you've parked in a limited parking zone or at a parking
meter. Also, if this system is used to activate an optional remote start system, the
controller has a remote start timer to keep track
of
how long the vehicle's engine
has been running.
Parking Timer: Press the "LOCK" button twice within 5 seconds to activate.
The digital clock display will change to "0:00" to indicate the timer has started.
The timer is in hours/minutes format and can be canceled by pressing the
"UNLOCK" button. Press the "P" button during the timer to see the clock
display.
It
will display for 5 seconds then return to the timer.
Remote Start Timer: Using the 3rd channel output to activate a remote start
system will automatically start the timer. The digital clock display will change
to "0:00" to indicate the timer has started. The timer is in hours/minutes format
and can be canceled by deactivating the remote start system. Press the
"P"
button during the timer to see the clock display.
It
will display for 5 seconds
then return to the timer.
Multi-Vehicle Operation: The ECHO 2-way controller is capable
of
operating
up to 2 separate systems in separate vehicles. This
is
indicated by seeing "CAR1"
or "CAR2" in place
of
the clock display. Select
"CAR
1" by pressing "LOCK" and
"P"
for 1 second. Select "CAR2" by pressing
"UNLOCK"
and
"P"
for 1 second.
Every alert to the controller will also indicate which
"CAR"
sent the alert.
Page - 20