SDS

Springpower Technology (Shenzhen)Co., Ltd. Page 3 of 12
Page 3 of 12
p)
Secondary cells and batteries need to be charged before use. Always
use the correct charger and refer to the manufacturer’s instructions or
equipment manual for proper charging instructions.
q)
Do not leave a battery on prolonged charge when not in use.
r)
After extended periods of storage, it may be necessary to charge and
discharge the cells or batteries several times to obtain maximum
performance.
s)
Retain the original product literature for future reference.
t)
Use only the cell or battery in the application for which it was intended.
u)
When possible, remove the battery from the equipment when not in use.
v)
Dispose of properly.
Details of the supplier of the safety data sheet:
Supplier Name:
Springpower Technology (Shenzhen)Co.,Ltd.
Address:
101, No.2, Chaoshun Industrial Zone, Fumin
Community, Fucheng Street, Longhua District,
Shenzhen City, Guangdong Province, P. R. China.
Telephone number of the supplier:
0755-61862699
E-mail address:
[e-mail]
Emergency telephone number
Company Emergency Phone Number:
0755-61862699
2. HAZARDS IDENTIFICATION
Classification
This chemical is not considered hazardous by the 2012 OSHA Hazard Communication Standard (29
CFR 1910.1200). This product is an article which is a sealed battery and as such does not require an
MSDS per the OSHA hazard communication standard unless ruptured. The hazards indicated are
for a ruptured battery.