A100 User Guide CricKet
Table of contents Safety.................................................4 About your device........................... 4 Before using your phone.................6 Handset description........................ 6 Battery usage.....................................7 Battery charging................................7 Battery handling information........ 8 Basic operation.................................9 Turning the phone on/off............... 9 Accessing the menu........................ 9 Accessing the menu map..
World time.........................................25 Memo pad........................................25 Calculator..........................................26 Tip calculator...................................26 Stop watch........................................27 Unit converter..................................27 Voice service...................................27 Voice command..............................27 V.Cmd settings................................28 Voice memo.....................................
Safety Read these simple guidelines. Not following them may be dangerous or illegal. Read the complete user guide for further information. Switch on safely Must be in the Do not switch the device on when wireless phone use is prohibited or when it may cause interference or danger. Road safety comes first Obey all local laws. Always keep your hands free to operate the vehicle while driving. Your first consideration while driving should be road safety.
or transferred. Warning: To use any features in this device, other than the alarm clock, the device must be switched on. Do not switch the device on when wireless device use may cause interference or danger. Remember to make back-up copies or keep a written record of all important information stored in your device. When connecting to any other device, read its user guide for detailed safety instructions. Do not connect incompatible products.
Before using your phone Handset description 12 13 1 6 2 3 4 7 8 9 11 14 10 5 1. Menu/Ok key 2. Settings menu 3. Voice command key 4. Send key 5. Microphone 6 Before using your phone 6. Navigation key 7. Contacts menu 8. CLR key 9. End key 10. Numeric keypad 11. Speaker 12. Headset port 13. Side volume keys 14.
Battery usage Battery installation 1. Place the battery (label side up) on the back of the phone so the metal contacts match up on the battery and in the battery cavity. 2. Slide the battery down into the battery cavity until it locks into place. Battery removal note If the battery is not correctly placed in the compartment, the handset will not turn on and/or the battery may detach during use. Battery charging Power connection 1. Plug the AC Charger into a standard outlet. 2.
powered on. • The battery is not charged at the time of purchase. • Fully charge the battery before use. • It is more efficient to charge the battery with the handset powered off. • The battery must be connected to the phone in order to charge it. • Battery operating time gradually decreases over time. • If the battery fails to perform normally, you may need to replace the battery. Battery handling information Do’s • Only use the battery and charger approved by the manufacturer.
Basic operation Turning the phone on/off Turning the phone on 1. Press the END Key until your “cricKet” logo appears and the tone sounds. note • If “Password” appears on the display enter your 4-digit password to unlock your phone. • The default password is the last 4 digits of your phone number. Turning the phone off 1. Press and hold the END Key until your “cricKet” logo appears. note • Immediately change or recharge the battery when “Powering down phone now.
note • Navigation Key up : Messages • Navigation Key down : Multimedia • Navigation Key left : Browser • Navigation Key right : Games&Apps Accessing the menu map 1. Recent Calls 1. All Calls 2. Missed Calls 3. Incoming Calls 4. Outgoing Calls 5. Call Timers 4. Multimedia 1. My Images 2. My Sounds 2. MESSAGES 1. Send Message 2. Inbox 3. Outbox 4. Drafts 5. Voicemail 6. Settings 7. Tools 1. Schedule 2. Alarm 3. World Time 4. Memo Pad 5. Calculator 6. Tip Calculator 7. Stop Watch 8. Unit Converter 3.
the End key. • When you place or receive a call from stored phone numbers, only the name will be displayed. • If “Please enter lock code” appears on the display enter your 4-digit password to unlock your phone. • Your default password is the last 4 digits of your phone number. 3. To end a call, press the END Key. Call Answer 1. When your phone rings or vibrates, press the SEND Key to answer the incoming call.
3-way calling With 3-Way Calling, you can talk to two people at the same time. When using this feature, the normal airtime rates will be applied for each of the two calls. 1. Enter a number you wish to call then press the SEND Key. 2. Once you have established the connection, enter the second number you wish to call then press the SEND Key. 3. When you’re connected to the second party, press the SEND Key again to begin your 3-Way call. 3-way calling is a system dependent feature.
during a call, the person you are speaking with cannot hear you or any sounds from your side of the conversation. However, you can still hear them. To activate Mute during a call. note • To deactivate, press the Left Soft Key Unmute. • The phone will automatically unmute in Emergency Call or Callback Mode. 2. Press the Right Soft Key Options. • 3 Way Calls : To call a second party during a call, dial the number or select it from the directory by accessing the menu during a call.
Memory function Storing a phone number The phone book stores up to 500 entries. 1. Enter phone number then press the Left Soft Key Save. 2. Select “New entry“ or “Existing entry“. 3. If “Existing entry” is selected, your contact list is displayed. Choose the entry to add the number, then press Left Soft Key Done. Select the type of Phone you are adding from the icon list, then press Left Soft Key Select. Press Left Soft Key Save.
input mode, press the Right Soft Key Options, then choose from the list on screen. • Standard input mode : Use the digit keys to enter letters, numbers and characters. • T9 input mode : T9 mode incorporates a built-in-dictionary to determine a word based on the entered characters. A word can be entered more quickly by pressing each key once per character. • Number mode : Allows you to enter numbers. • Symbol mode : Allows you to enter symbols. • Emoticon mode: Allows you to enter Emoticon.
Recent calls call will be automatically erased from the history. All calls Incoming calls 1. Press the OK Key Menu > Recent Calls > All Calls. If the number is already stored in your contact list, only the name appears. If the number is not stored, the number appears. 1. Press the OK Key Menu > Recent Calls > Incoming Calls. If the number is already stored in your contact list, only the name appears. If the number is not stored, the number appears. 2. To view details, press the OK Key.
note After 80 outgoing calls, the oldest call will automatically be erased from the history. Call timers Checks the usage time and manages your calls within the limit you set. The 11 timers include (Last Call, Dialed Calls, Received Calls, Home Calls, Roam Calls, All Calls, Lifetime Calls, Transmit Kb, Received Kb, Total Kb, Lifetime Data Counter, Last Reset): 1. Press the OK Key Menu > Recent Calls > Call Timers. 2. To reset all timers, press the Right Soft Key Reset All. “Reset all?” will be displayed.
press the OK Key. 3. Select a message, then press the OK Key. The message is displayed. Press the Left Soft Key Reply, to send the reply message. Outbox Manages sent messages. 1. Press the OK Key Messages > Outbox. Menu > 2. To delete a message, press the Left Soft Key Erase, then select “Yes” and press the OK Key. To delete all messages, press the Right Soft Key Erase All, then select “Yes” and press the OK Key. 3. Select a message, then press the OK Key. The message is displayed.
or Press the OK Key Send to dial voicemail. From the idle screen, press then the SEND Key Send to direct dial voicemail. If the feature “Speed Dial” is enabled you can press and hold to speed dial voicemail. Call Voicemail Place a call to the number (*99) the voicemail was sent to. 1. Press the OK Key Menu > Messages > Voicemail > Call Voicemail. Details View last voicemail information. 1. Press the OK Key Menu > Messages > Voicemail > Details. Clear Notification Delete the voicemail icon. 1.
that can be automatically inserted at the end of a text message. Select “None” or “Custom” then press Left Soft Key Set to save the setting. If you select “Custom”, the signature input screen appears. • Preset Msgs. : The preset messages are displayed. Contacts Find Retrieves an entry by name and calls the primary number by simply pressing the SEND Key. You can review all the entries stored in your contacts list or quickly find an entry by entering a name or its character string. 1.
note Speed Dial must be activated. Add new group 1. Press the OK Key Menu > Contacts > Speed Dials. 1. Press the OK Key Menu > Contacts > Group. 2. T o assign a phone number to a location, select the location then press the Left Soft Key Assign. 2. Press the Left Soft Key Add to add a new group name. “empty” appears if the location is available. 4. T o save it, press the Left Soft Key OK. note 3. Scroll to the contact in the list. 4.
the setting. downloaded still images. Service number 1. Press the OK Key Menu Multimedia > My Images. > Your Contacts list is preprogrammed with contact numbers for various services. 2. S croll through the downloaded images to display the image. 1. Press the OK Key Menu > Contacts > Service Number. My sounds 2. Select the number (Info ”411“ / Cust. Svc. ”611“ / Cust. Care ”*611“ / *PAY ”*729“) then press the OK Key. 3. Press the SEND Key to call. This menu displays the downloaded ringtones.
the phone displays the homepage. • Back : When the “Back” item is selected from the Browser Menu, the phone displays the previous page in the history. • Forward : When the “Forward” item is selected from the Browser Menu, the phone displays the next page in the history. This is only available if the user has navigated backward in the history. • Reload : Selecting the “Reload” item from the Browser Menu refreshes the current page. • Mark Page : To save the page as a bookmark.
Tools Schedule Sets an event and reminds you of that event. Add new calendar 1. Press the OK Key Menu > Tools > Schedule. 2. Press the Navigation Key to choose a date in the calendar, then press the Left Soft Key Add. 3. The ”Add New” screen will be displayed. • Title : Enter the event name. • Start date : You can edit the start date for the event. • Start time : Enter the start time. Press the Right Soft Key for am or pm. • End date : You can edit the end date for the event.
details for the event. • Press Right Soft Key Options. (Add new, Go to Date, Erase, Erase All) Press the Left Soft Key Edit to edit the event, then press the Left Soft Key Save to save the event. Alarm 1. Press the OK Key Menu > Tools > Alarm. 2. Select Alarm #1, 2 or 3 to set a new alarm. To edit an existing alarm, select the alarm name. Press the OK Key. 3. To save an alarm setting press the Left Soft Key Save. • Set: Press the Navigation Key left or right to select alarm ”On” or ”Off”.
compose and store reminders and Memos. Add new memo To compose a memo: 1. Press the OK Key Menu > Tools > Memo Pad. 2. To add a new memo, press the Left Soft Key Add. Input a new text memo. 3. T o save memo, press the Left Soft Key Save. View memo To view a saved memo: 1. Press the OK Key Menu > Tools > Memo Pad. 2. The Memopad list of memos is displayed in the order they were saved. To add a new memo, press the Left Soft Key Add. • Highlight a memo and press the Right Soft Key Options.
move the next field “Rate”. • Press the Left Soft Key Point(.) for to enter a decimal point. 3. Enter the percentage amount to “Rate” and move the next field “# of people”. 4. Enter the amount of “# of people” number. Press the OK Key to calculate the result. • Press the Right Soft Key Erase. Stop watch the stopwatch. Unit converter To access the Tip calculator: 1. Press the OK Key Menu > Tools > Unit Converter. 2. S elect the desired type of measurement, and then press the Down Key.
• LOOKUP : Use the Lookup command to retrieve and display information for any name stored in your Phonebook Entry list. • CHECK - : The Check command lets you check status information for your phone. You can say “Check“ or “Check Status“ to see and hear all status information. • Press the Left Soft Key Tutorial. Voice Commands menu information appears. To return to the previous page, press the Left Soft Key Skip. • Press the Right Soft Key Settings.
Voice memo Display Voice Memo allows you to record a reminder message that can be up to 4 minutes. Menu style 1. Press the OK Key Menu > Voice Service > Voice Memo. 2. To record a voice memo, press the Left Soft Key Record. 3. T o start recording a voice memo, press the OK key Record button and if you want to stop recording, press the OK Key Stop button and to save your voice memo, press the OK Key Save button one more time. 4.
Clock Format 2. S elect “On” or “Off”. 1. Press the OK Key Menu > Settings > Display > Clock Format. 3. P ress the Left Soft Key Set to save the setting. 2. Select “Analog Clock”, “Dual Time Clock”, “Calendar” or “Digital Clock”. Backlight 3. P ress the Left Soft Key Set to save the setting. Incoming Calls 1. Press the OK Key Menu > Settings > Display > Incoming Calls. 2. Select “Preset Images” or “My Images”. 3. Press the Navigation Key up or down to scroll through the images. 4.
Sounds Ring tone To select how the Menu appears on your phone: 1. Press the OK Key Menu > Settings > Sounds > Ring Tone. 2. Select “Voice Call”, “Messages” or “Voice Mail”. • Preset Sounds: Select ring tone. • My Sounds: Select download Ringer. 3. Press the Left Soft Key Set to save the setting. Volume To select how the Menu appears on your phone: 1. Press the OK Key Menu > Settings > Sounds > Volume. • Voice Calls : To adjust voice calls volume. • Speakerphone : To adjust Speakerphone volume.
• Power On/Off : To set phone to sound a tone when the phone is powered on/off. 2. Select “On” or “Off”. 3. Press the Left Soft Key Select > set to save the setting. Tone length 1. Press the OK Key Menu > Settings > Sounds > Tone Length. 2. Select “Short” or “Long”. > Call > Contacts Match. 2. Select “On” or “Off”. 3. P ress the Left Soft Key Set to save the setting. Call answer To select an answer mode: 1. Press the OK Key Menu > Settings > Call > Call Answer. 2. Select “Talk Key” or “Any Key”.
TTY (Teletypewriter) device in digital modes. This feature is system dependent and may not be available in all areas. 1. Press the OK Key Menu > Settings > Call > TTY Mode. 4 digits of your phone number. 2. S elect “Lock Now”, “Unlock” or “On Power Up”. 3. P ress the Left Soft Key Set to save the setting. 2. Read the message, then press the Left Soft Key Next. Change lock code 3. S elect “TTY + Full”, “TTY + Talk”, “• TTY + Hear” or “TTY Off”. 1.
even when the phone is locked. 1. Press the OK Key Menu > Settings > Security > Enter your password. > Special Number. The default Lock code is the last 4 digits of your phone number. note 2. Select a location(1. 911, 2. *911, 3. #911) and press the Left Soft Key Add/Edit. Enter the phone number and press Left Soft Key Save to save it to that location. 3. Press the Right Soft Key Erase to erase the Special Number. Select “No“ and press the OK Key.
1. Press the OK Key Menu > Settings > Security > Enter your password. > Reset Phone. Others note The default Lock code is the last 4 digits of your phone number. Selects the language in which letters are displayed on the screen. 2. “Reset phone?” will be displayed. Select “1. Yes“ and press the OK Key. 1. Press the OK Key Menu > Settings > Others > Language. 3. “Really?” will be displayed. Select “1. Yes” and press the OK Key. 3. Press the Left Soft Key Set to save the setting.
Location To set the location function: 1. Press the OK Key Menu > Settings > Others > Location. 2. Select “Location On” or “E911 Only”. 3. P ress the Left Soft Key Set to save the setting. System select To set the location function: 1. Press the OK Key Menu > Settings > Others > System Select. 2. Select “Home Only” or “Automatic”. 3. Press the Left Soft Key Set to save the setting. Phone info Displays the information of your phone: My phone number Displays your MDN and MIN. 1.
1. Press the OK Key Menu > Settings > Phone Info > ESN/MEID. 2. To return to the previous page, press the Right Soft Key Close or OK Key. Icon glossary Displays the icons. 1. Press the OK Key Menu > Settings > Phone Info > Icon Glossary. 2. Your phone’s indicator icons are displayed. 3. Press the OK Key, your phone’s indicator icons information are displayed. Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care.
mechanics. • Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. • Do not paint the device. Paint can clog the moving parts and prevent proper operation. • Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could damage the device and may violate regulations governing radio devices. • Use chargers indoors. • Always create a backup of data you want to keep, such as contacts and calendar notes.
Cricket will repair or replace, at Cricket’s sole option, any defective parts, or any parts that will not properly operate for their intended use with new or refurbished replacement items if such repair or replacement is needed because of product malfunction or failure during normal usage. the Limited Warranty does not cover defects in appearance, cosmetic, decorative or structural items, including framing, and any non-operative parts.
collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an act of God, or battery leakage, theft, blown fuse, or improper use of any electrical source, damage caused by computer or internet viruses, bugs, worms, trojan Horses, cancelbots or damage caused by the connection to other products (including but not limited to hardware and software) not recommended for interconnection by Cricket. c.
under the Limited Warranty within 30 days after receipt of the Product. If Cricket cannot perform repairs covered under this Limited Warranty within 30 days, or after a reasonable number of attempts to repair the same defect, Cricket at its option, will provide a replacement Product or refund the purchase price of the Product less a reasonable amount for usage. e.
USE; WarrantIES of tItLE or non-InfrInGEmEnt; DESIGn, ConDItIon, QUaLItY, or PErfromanCE of tHE ProDUCt; tHE WorKmanSHIP of tHE ProDUCt or tHE ComPonEntS ContaInDED tHErEIn; or ComPLIEnt of tHE ProDUCt WItH tHE rEQUIrEmEntS of anY LaW, rULE, SPECIfICatIon or ContraCt PErtaInInG tHErEto. 11.
for a PartICULar PUrPoSE, arE HErEBY LImItED to tHE SamE DUratIon of tImE aS tHE EXPrESS WrIttEn WarrantY StatED HErEIn. 12. Some states do not allow limitation of how long an implied warranty lasts, so the one (1) year warranty limitation may not apply to you (the Consumer). Some states do not allow the exclusion or limitation of incidental and consequential damages, so certain of the above limitations or exclusions may not apply to you (the Consumer).
purchase price. 16. If anY PortIon of tHIS LImItED WarrantY IS HELD ILLEGaL or UnEnforCEaBLE BY rEaSon of anY LaW, SUCH PartIaL ILLEGaLItY or UnEnforCEaBILItY SHaLL not affECt tHE EnforCEaBILItY for tHE rEmaInDEr of tHIS LImItED WarrantY WHICH PUrCHaSEr aCKnoWLEDGES IS anD WILL aLWaYS BE ConStrUED to BE LImItED BY ItS tErmS or aS LImItED aS tHE LaW PErmItS. Additional safety information Small children Your device and its enhancements may contain small parts. Keep them out of the reach of small children.
equipment, including wireless devices, may interfere with the functionality of inadequately protected medical devices. Consult a physician or the manufacturer of the medical device to determine if they are adequately shielded from external RF energy or if you have any questions. Switch off your device in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
interference occurs, consult your service provider. Hearing aid compatibility Your mobile device model complies with FCC rules governing hearing aid compatibility. These rules require an M3 microphone or higher value. The M-value, shown on the device box, refers to lower radio frequency (RF) emissions. A higher M-value generally indicates that a device model has a lower RF emissions level, which may improve the likelihood that the device will operate with certain hearing aids.
device in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty that may apply to the device. Check regularly that all wireless device equipment in your vehicle is mounted and operating properly. Do not store or carry flammable liquids, gases, or explosive materials in the same compartment as the device, its parts, or enhancements. For vehicles equipped with an air bag, remember that air bags inflate with great force.
powders. You should check with the manufacturers of vehicles using liquefied petroleum gas (such as propane or butane) to determine if this device can be safely used in their vicinity. Emergency calls 2. P ress the end key as many times as needed to clear the display and ready the device for calls. 3. E nter the official emergency number for your present location. Emergency numbers vary by location.
ICNIRP and include safety margins designed to assure the protection of all persons, regardless of age and health. testing requirements and the network band. Additional SAR information may be provided under product information at. The exposure guidelines for mobile devices employ a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit stated in the ICNIRP guidelines is 1.6 watts/kilogram (W/kg) averaged over 1 grams of tissue.
resulting in bodily injury or even death. INTERFERENCE DIVICES TO MEDICAL Certain electronic equipment may be shielded against RF signal from you wireless phone. (pacemakers, Hearing Aids, and so on) Turn your phone OFF in health c are facilities when any regulations posted in these areas instruct you to do so. RF signals may affect improperly installed or inadequately shielded electronic system in motor vehicles. EXPOSURE TO RF ENERGY Use only the supplied or an approved replacement antenna.
Including interference that may cause undesired operation. U.S.A. U.S.FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT INFORMATION TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference in a residential installation.
01-309 modified the exception of wireless phones under the Hearing Aid Compatibility Act of 1988 (HAC Act) to require digital wireless phones be compatible with hearing-aids. The intent of the HAC Act is to ensure reasonable access to telecommunications services for persons with hearing disabilities.While some wireless phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing,humming, or whining noise.
best use. In the above example, if a hearing aid meets the M2 level rating and the wireless phone meets the M3 level rating, the sum of the two values equal M5. This should provide the hearing aid user with “normal usage” while using their hearing aid with the particular wireless phone. “Normal usage” in this context is defined as a signal quality that is acceptable for normal operation. The M mark is intended to be synonymous with the U mark. The T mark is intended to be synonymous with the UT mark.
