User`s guide

70
User’s Guide
Rev. 110212
Correcting Errors
Use the left or right arrows to move to the erroneous character. The character will flash. Press
the “X” key to delete the character. To insert a character, move the cursor to the number or
letter BEFORE the place where you want to insert additional characters. Press
OK
to save.
TIP: You may also use the “X” key as a backspace.
Editing or Deleting Contacts
STEPS
3) Open your list of contacts (Directory > Local Directory > Contact List) then use the
Up/Down arrows to locate the contact to be edited or deleted.
To Edit: Press the Right Arrow until you see “Edit” then press the
OK
button. Arrow
Up/Down to locate the name or phone number to be edited for this contact. Use the
Right/Left Arrows change and delete/add characters as needed.
To Delete: Press the Right Arrow until you see “Del” then press the
OK
button. You will
receive a warning message. Press the
OK
button to continue with deleting or the “X”
button to void the deletion.
Dialing from the Local Directory
STEPS
3) Open your list of contacts (Directory > Local Directory > Contacts) then use the
Up/Down arrows to locate the desired contact.
4) Press
OK
to dial the number
If you have
entered more than one phone number for this contact you will see a list of their
available phone numbers. Arrow Up/Down to select the number to be dialed, then press
the
OK
button to call that number.