User`s guide

58
User’s Guide
Rev. 110212
Section 1: Making a Call
You use a Crexendo Telephone to make a call the same way you would use any phone.
Make calls to fellow co-workers by simply dialing their 4-digit extension number
Make calls to outside customers or suppliers by dialing the Area Code + Phone
Number.
INFO: There is no need to dial a “1” before dialing Long Distance. There is also no
distinction between “Inside” and “Outside” calls. While you may still opt to use an
Outbound Dial Code (traditionally this was a “9” preceding any calls outside the
System), the Crexendo Telephone System does not require it.
You may make calls using the Handset, a Speaker Phone, or by using a Headset.
INFO: To expedite your call, press the “#” key after dialing the number. This lets you
skip the pre-programmed “pause” time before a call begins dialing.
Call Using the Phone Handset
STEPS:
8) Lift the Handset
9) Dial the number or extension of the party you wish to reach
10) Wait for the recipient to answer
Call Using the Speaker Phone
STEPS:
1) Lift the Handset
2) Dial the number or extension of the party you wish to reach
3) Wait for the recipient to answer
4) Press the Speaker button
OR
1) Do not lift the Handset
2) Dial the number or extension of the party you wish to reach
3) Wait for the recipient to answer
Call Using the Headset
STEPS:
1) Press the Line button you wish to dial out on
2) Dial the number or extension of the party you wish to reach
3) Wait for the recipient to answer