User`s guide

34
User’s Guide
Rev. 110212
Section 5: Setting Date and Time
The time and date should automatically appear on your phone when it is plugged in and goes
through its power-up cycle. The date and time are set based on the time zone you specified at
the time the order for the phone was placed. You may manually override the system-provided
date/time at any time by using the phone interface.
Setting the Date:
STEPS:
1) Press Menu
2) Use the Down Arrow to move to the Settings Option > Press OK
3) Click OK on Basic Settings
4) Use the Down Arrow to move to the Time & Date Option > Press OK
5) Use the Up/Down Arrows to select Manual Settings> Press OK
You will be automatically positioned ready to edit the first character of the Date field.
On the SIP 200 Model phone this will be the Day field. The Date is entered in D-M-Y
format.
On the SIP 300 Series phone this will be the Year field. The Date is entered in Y-M-D
format.
6) Enter the Date in the format appropriate for your phone > Press OK or the Save Softkey
(SIP 300 Series) to save the new date.
Setting the Time:
STEPS:
1) Press Menu
2) Use the Down Arrow to move to the Settings
Option > Press OK
3) Click OK on Basic Settings
4) Use the Down Arrow to move to the Time & Date
Option > Press OK
5) Use the Up/Down Arrows to select Manual >
Press OK
You will be automatically positioned ready to edit
the first character of the Date field.
6) Use the Down Arrow to move to the Time Option.
You will be automatically positioned ready to edit
the first character of the Time field. This will be the Hour field. The Time is entered in
HH-MM-SS format.